S&B Filters CNC Intake Elbow for 2003-07 Dodge Cummins

S&B Filters CNC Intake Elbow for 2003-07 Dodge CumminsIntroducing the new CNC Intake Elbow for the Dodge Cummins.

• The new S&B elbow provides 8 ports so you can inject & monitor until your hearts content.
• S&B has also provided airtight plugs to cover any unused ports.
• Authorized Testing Inc. performed the burst testing on the new CNC elbow. To perform the test, both ends of the elbow were sealed, and water was pumped into the elbow until the point of failure. The S&B elbow with stood up to 300 psi before it cracked at the weld. A stock truck would see no more than 30 psi. A truck with all the bells and whistles should see no more than 100 psi.
• Advanced flow software technology is a huge technical edge that allows the S&B engineers to eliminate dead areas, pinpoint optimal velocity, streamline the airflow, and beat the other guys!
• The standard procedure for attaching an elbow to an intake has been to run two bolts through the interior of the elbow. This restricts airflow and hinders performance. Our new elbow attaches with four bolts on the outside of the elbow resulting in a tighter seal, increased airflow and better performance.