South Bend 12-1/4" Clutch for 1989-2005 Dodge 5-Speed

South Bend 12-1/4" Clutch for 1989-2005 Dodge 5-Speed and 6-Speed non-ETH Trucks This Dyna Max kit features an organic friction material comprised of 808 composite, resulting in a significantly reduced operating temperature which gives this kit ultra-smooth engagement & extended life. This kit will hold up to 350 horsepower & 700 ft. lbs. of torque. Years 1989-2005, 5 speed & 6 speed non-ETH. Applicaitons:

• 1988-2004 5-Speed and 6-Speed (non-ETH) trucks

Choosing the Right ClutchIf you are reading this, you might be in the market for a new clutch, and if so, you may have discovered there are many options. This segment was put together by South Bend Clutch to help you choose the right one. There are many things to consider. First, it is important that you learn a little something about a clutch. What it is, what it does and why one clutch might be considered ﾓbetterﾔ than another. When people ask South Bend Clutch for advice, they often hear the phrase ﾓI just want the best clutch you haveﾔ. Most customers believe that if one clutch has a higher power rating than another, that it somehow means it is better. That is not necessarily the case. There are several reasons you might need to upgrade your clutch. You have increased the horsepower and torque of the engine; you may exceed the recommended towing capacity of the truck, or a combination of both. There is also the group of people who build up their trucks for competitions like sled pulling or drag racing. So when you have people who just drive their trucks, people who work with their trucks and people who play with their trucks, you come to realize that they may all need different types of clutches. So the question is not ﾓwhich is your best clutch?ﾔ it becomes ﾓwhich clutch is best for my application?ﾔ. So do this. First, figure out how much power your truck has. This may not be as easy as it sounds, because, unless you have had your truck on a dyno, there will be some guess work involved. It is important to get as close as you can. Many people donﾒt realize that you can over-clutch a system either. A clutch designed to hold 500 HP may not act right in a truck that only puts out 350 HP to the rear wheels. We often hear people say that the ﾓmightﾔ add more power in the future. Realize that if you choose a clutch based on that, and you donﾒt upgrade late, you might end up with parts that you will not be happy with. Next, decide what you want to do with your truck. Is it just a daily mode of transportation? Do you do any towing with it, if so, to what degree? Do you want to compete with it, if so how often? What size is you truck? Is it 2 or 4 wheel drive? Be specific. These are all important factors. Here are some general rules:

• The HP rating of the clutch should match or slightly exceed the estimated HP of the truck.
• Any truck used for competition sled-pulling should use an SFI approved multi-disc clutch.
• Trucks that regularly to 15,000 lbs. or more should use a double disc clutch designed for the street, regardless of the HP level.
• Trucks that are above 450 RWHP which are used primarily for towing should use a street double disc. A full metallic single disc clutch is likely to engage too aggressively, especially on 2WD trucks.
• High torque clutches often incorporate metallic linings which may cause an aggressive engagement. This may be even more apparent when towing.
• Performance or high torque clutches may feel, drive or sound different than the factory system.

Remember, when vehicles are modified beyond their factory specifications or used above the factory limitations, to the point where a performance clutch is necessary, things are going to feel different. By choosing the right clutch for your application, you can minimize these effects. However, some of the differences in how a clutch feels or sounds may be necessary to make the clutch hold and last. Here are some unreasonable requests:

• My truck puts 800 HP to the ground and I drive it every day and I want a clutch that doesnﾒt push hard.
• My truck only has 400 HP, so I just need a single disc clutch, but I want to sled pull once in a while.
• I pull 20,000 lbs every day but I canﾒt afford a double disc clutch. How many miles do you think I can get out of a single disc clutch?
• This is the last clutch I ever want to put in my truck.

You need to realize that each clutch has limitations and that clutches that are built to hold extreme horsepower may not be the easiest clutch to drive on the street every day. So, as South Bend Clutch said before, you need to decide what you want to do with your truck and understand that you are responsible for some of the consequences of trying to do too much. When you are buying a clutch, keep one thing in mind. No clutch is indestructible. No matter who made it or what it is rated for, you can destroy it in a hurry if you donﾒt use it properly. So if you are careful when choosing it and reasonable when using it, you can get the most out of your clutch.